Welcome to... 

Industrial Plastic Supply, Inc.your best resource for plastic materialsquality without compromisethe website that if often immitated, but never duplicated!the Polyethylene Sheet and Rod Page

Polyethylene (LDPE, HDPE, UHMW)

HDPE and LDPE Massive HDPE Round Rod 19

High Density Polyethylene (HDPE) and Low Density  Polyethylene (LDPE) are both materials in the Polyolefin family of plastics, along with Polypropylene (PolyPro) and UHMW (Ultra High Molecular Weight).

Manufactured by a variety of manufacturers under the names: Polyboard®, Polymar®, Hostalen®, Polystone®, Hitec®, Sanatec®, Sanalite®, UltraEthylux®, Polycarve®, and Densetec®.

For great abrasion resistance, very low density and FDA/NSF compliance, Polyethylene is an excellent choice.

Why you should use HDPE/LDPE:

  • Light Weight
  • Stain, Odor and Moisture Resistant
  • FDA & NSF Approval for Food Contact
  • Vacuum and Thermo-Formable Material
  • Very Durable and Abrasion Resistant

Polyethylene materials have high impact strength, superior abrasion resistance and low coefficient of friction.

Very light weight (density of .91 – .96), thus lighter than water and yet extremely durable.

FDA and NSF approved for food contact. Low forming temperature for ease of vacuum or thermoforming.

  • Self Lubricating and Low Co-Efficient of Friction
  • Very High Chemical Resistance
  • Low Specific Gravity (Floats in Water)
  • Can be Heat Welded or RF Welded
  • High Impact Strength and Energy Absorption
  • Excellent Wear Resistance and FDA/NSF Approved
  • Exceptional Low Temperature – Brittle at -110 degrees F

Frequently used in:

  • Cutting Board and Food Preparation Surfaces
  • FDA, USDA, NSF Compliant Machined Parts
  • Heat Formed and Vacuum Formed Parts
  • Dasher Board For Ice Rinks – Impact Parts
  • Welded Tanks, Hoppers, Silo Linings and Slide Chutes
  • Chemical and Structural Tanks and Covers
  • Food Processing Equipment, Valve and Pump Components

Materials Available As

Extruded Sheet:

.030 – 2.0″ in 48″ X 96″ Smooth Surfaces Natural Sheet in HDPE, 1″ max. for LDPE

Black available in many sizes of HDPE

Film:

.015″ – .060″ in 48″ wide Natural

Rod:

.250″ – 10″ diameter in Natural HDPE – 96″ lengths

From 12″ and up to 30″ diameter in 48″ lengths or 39″ lengths in HDPE
Black is available in many sizes of HDPE

Tube:

.250″ OD – 10″ OD in various wall thicknesses. Most available in HDPE and many in LDPE

Special Formulations:

Conductive, Static Dissipative, Custom sizes, Formulations, Profiles or Colors.

If you are looking to get HDPE that is UV

stabilized for an outdoor or marine

application.

Click the button below

Sunboard- UV HDPE

If you are looking to get HDPE that is UV

stabilized for an outdoor application in

a variety of colors.

Click the button below

Playground Board
SDS
Prop 65
Store

These Properties are for evaluation purposes only.

This information is not to be construed as a warranty, guarantee or assurance that you may achieve the same results. Materials made from different resin types, manufacturing techniques and manufacturers will react differently. The information should be used to compare against other materials only, and each user should make his own tests to determine suitability. No warranty as to this materials suitability are either expressed or implied.