Welcome to... 

Industrial Plastic Supply, Inc.your best resource for plastic materialsquality without compromisethe website that if often immitated, but never duplicated!the PEEK Sheet and Rod Page

PEEK - Polyetheretherketone

PEEK is a highly crystalline thermoplastic with excellent properties making it an ideal material for medical, electrical and electronic industries. Also makes great pump bodies, compressor components, valve seat, and housing applications.

Rated as “Best” or nearly the best in all mechanical properties of plastic materials. It carries UL 94-V-0 flammability rating and is FDA approved for food contact.

VICTREX is the leading supplier of this specialty resin with their 450G material, although the name PEEK is the generic for the resin. This range of materials also includes: Avaspire®, PAEK and PEKK grades which offer similar but improved property ranges in either impact, heat or stress applications.

Why you should use PEEK:

  • It has excellent chemical resistance
  • has extremely high continuous temperature to 480 degrees F
  • Is outstanding wear resistance and low moisture absorption
  • Has good dimensional stability
  • Excellent Machining
  • Low co-efficient of friction/ Superior wear resistance
  • Dimensionally stable
  • Very low moisture resistance
  • Outstanding Wear resistance and excellent dimensional stability
  • Is USP Class VI approved for medical applications
  • This materials is…an excellent machining material – a favorite of machinists. Works like a soft brass, and has exceptional dimensional stability.
  • Excellent Machining
  • Victrex 450G PEEK Rod
  • Low co-efficient of Friction / Superior Wear Resistance
  • imensionally stable
  • Very low moisture resistance
  • Outstanding Wear Resistance and Excellent Dimensional Stability
  • Is USP Class VI approved – upon factory request (per batch)

Contact us for more information on all the other grades in the Ketone family. While it solves many demanding engineering requirements, it is also rather expensive. Most clients choose these resins as a last resort, but if your design calls for high heat, high chemical resistance, excellent dimensional stability, excellent wear resistance and/or USP certification, these are an excellent solution.

VICTREX has been at the forefront of high performance plastic materials, with PEEK being their flag-ship product line. Mil-P-46183 is most common specification associated with PEEK, call for additional information.

Materials Available As

Sheet, Rod, Tube and Film:

Rod:

.250″ – 6.0″ Diameter

Sheet:

.250″ – 4.0″ Thickness

Tubular Bar:

Up to 36″ OD – call with your requirements.
Special Formulations: Non-Standard sizes, colors, glass filled and bearing grades

Typical Resin Properties:

General Property ASTM Test Typical Value
Specific Gravity D792 1.32
Tensile Strength Yield D638 14,500
Tensile Modulus D638 522,000
Izod Impact – Notched D256 1.57
Hardness – Rockwell D785 M-99 /R-126
Continuous Use Temp UL 480
Deflection Temp @ 264psi D648 320
Co. Thermal Expansion D696 2.6 X 10-5
General Property ASTM Test Typical Value
Specific Gravity D792 1.32
Tensile Strength Yield D638 14,500
Tensile Modulus D638 522,000
Izod Impact – Notched D256 1.57
Hardness – Rockwell D785 M-99 /R-126
Continuous Use Temp UL 480
Deflection Temp @ 264psi D648 320
Co. Thermal Expansion D696 2.6 X 10-5
SDS
Prop 65
Store

These Properties are for evaluation purposes only.

This information is not to be construed as a warranty, guarantee or assurance that you may achieve the same results. Materials made from different resin types, manufacturing techniques and manufacturers will react differently. The information should be used to compare against other materials only, and each user should make his own tests to determine suitability. No warranty as to this materials suitability are either expressed or implied.